How to size the door of the hanging cabinet
In kitchen decoration, the design and installation of hanging cabinets are a very important part, especially the size allocation of hanging cabinet doors, which directly affects the user experience and aesthetics. This article will introduce you in detail the method of wall cabinet door size allocation, and combine the popular topics and hot contents of the entire network for the past 10 days to provide you with practical reference.
1. Basic principles for size allocation of hanging cabinet doors
The size distribution of hanging cabinet doors must follow the following basic principles:
1.The principle of symmetry: The design of the hanging cabinet door should be kept symmetrical as much as possible to avoid affecting the appearance due to uneven sizes.
2.Practical principle: The size of the door should be easy to use for daily use, avoiding inconvenience in operation due to too large or too small.
3.Structural stability principle: The size distribution of the door should ensure the stability of the cabinet structure to avoid affecting the load bearing due to excessive or excessive door weight.
2. Specific methods for distribution of wall cabinet door sizes
There are usually several methods for the size allocation of hanging cabinet doors:
| Distribution method | Applicable scenarios | Pros and cons |
|---|---|---|
| Aliquoting method | Suitable for hanging cabinets of the same width | High aesthetics, but poor flexibility |
| Inequality method | Suitable for hanging cabinets of different widths | High flexibility, but slightly less aesthetic |
| Mixed division method | Suitable for complex cabinet structures | Beautiful and practical, but the design is difficult |
3. Things to note when allocating the size of the hanging cabinet door
1.Door slot width: The gap between the doors of the hanging cabinet should be controlled at 3-5mm to avoid affecting the switch due to the large or too small gap.
2.Door panel thickness: The thickness of the door panel is usually between 18-25mm. Too thin will affect the load bearing, and too thick will increase the weight.
3.Hardware accessories: Choose the right hinge and slide rail to ensure smooth and durable door switches.
4. References to popular topics and hot content across the entire network
According to popular topics across the network in the past 10 days, the following content is related to the size allocation of hanging cabinet doors:
| Hot Topics | Hot content | Reference value |
|---|---|---|
| Kitchen decoration design | How to design a reasonable size for the cabinet door | high |
| Home storage skills | Effect of wall cabinet door size on storage | middle |
| Hardware accessories selection | Requirements for door size between hinges and slide rails | high |
5. Summary
The size distribution of hanging cabinet doors is an important part of kitchen decoration, and it is necessary to comprehensively consider aesthetics, practicality and structural stability. Through equalization, non-equalization or mixed division, different cabinet structures can be flexibly dealt with. At the same time, pay attention to the width of the door joint, the thickness of the door panel and the choice of hardware accessories to ensure the user experience and durability of the hanging cabinet door. Combining the popular topics and hot content on the entire network, I hope this article can provide you with practical reference.
If you have other questions about the size allocation of the hanging cabinet door, please leave a message to discuss!
check the details
check the details
en
